LG W081CA - How to Use the Reversible

3.5 HOW TO USE THE
REVERSIBLE INLET GRILLE
1. I f you want to pull out the filter upward, open the
inlet grille slightly. Turn inside out the front grille.
Disassemble the inlet grille from the front grille
with separating the hinged part by inserting a "—"
type screw-driver tip.
Rotate the inlet grille 180 degrees and insert the
hooks into the lower holes of front grille.
Then, insert the filter (See Figure 30, 31)
2. A ttach the front grille to the cabinet by inserting the
tabs on the grille into the tabs on the front of the
cabinet. Push the grille in until it snaps into place.
(See Figue 32)
Figure 30
Figure 31
3. L ift the inlet grille and secure it with a type A screw
through the front grille.
(See Figure 33)
4. I f you want to pull out the filter downward, use the
reversible inlet grille without change.
(The grille is already assembled for that way.)
Figuig
— 19 —