LG W081CA - Control Locations.4; Features.3

1.4 FEATURES
• Designed for COOLING ONLY.
• Powerful and whispering cooling.
•Slide-in and slide-out chassis for the simple
installation and service.
• Side air-intake, side cooled-air discharge.
• Built-in adjustable THERMOSTAT
• Washable one-touch filter
• Compact size
• Reliable and efficient rotary compressor is equipped.
1.5 CONTROL LOCATIONS
1.5.1 COOLING ONLY MODEL
• VENTILATION
The ventilation lever must be in the CLOSE position
in order to maintain the best cooling conditions.
When a fresh air is necessary in the room, set the
ventilation lever OPEN position.
The damper is opened and room air is exhausted.
• THERMOSTAT
Thermostat will automatically control the temperature
of the room. Select a higher number for a cooler
temperature in the room. The temperature is selected
by positioning the knob to the desired position.
The 5 or 6 position is a normal setting for average
conditions.
• OPERATION
Off -Turns air conditioner off.
Med Fan - Med speed fan operation without cooling.
Low Fan - Low speed fan operation without cooling.
High Cool - Cooling with high speed fan operation,
Med Cool - Cooling with med speed fan operation.
Low Cool - Cooling with low speed fan operation.
• OPERATION
Off
Low Fan
Low Cool
High Cool
Low Heat
High Heat
( O ) :Turns the air conditioner off.
( © ) Permits the low fan speed operation
without cooling (heating).
( # ) Permits cooling with the low fan
speed operation.
( ) Permits cooling with the high fan
speed operation.
( * ) Permits heating with the low fan
speed operation.
(-jJj-) Permits heating with the high fan
speed operation.
• Auto Swing (For R1403/WRI 210)
On: Air Swing is operated while operation knob is set to
the Cool position
Off: Stops the operation of air swing.