OPERATION
Control Panel and Remote Control
Remote Control
Power
Press to turn the air conditioner ON or OFF.
Sleep Mode
This mode keeps operating noise to a minimum
and turns the air conditioner off after a set time.
The timer can be set from 1 to 7 hours.
• In the Cool, Energy Saver, Dry Mode, the
setting temperature increases by 1 °C after 30
minutes and additional 1 °C after another 30
minutes for a more comfortable sleep.
• The setting temperature increases up to 2 °C
from the preset temperature.
Delay ON/OFF Timer
Delay ON - When the air conditioner is off, set it to
automatically turn on from 1 to 24 hours later, at its
previous mode and fan settings.
Delay OFF - When the air conditioner is on, set it
to automatically turn off from 1 to 24 hours later.
NOTE
• Each press of the Timer button advances
the timer by 1 hour. After the last press the
display returns to the temperature setting.
Operation Mode
Press the Mode button to cycle between 4
types of air conditioner operation: Energy
Saver / Cool / Fan / Dry.
Energy Saver - In this mode the compressor
and fan turn off when the set temperature is
achieved. Approximately every 3 minutes the
fan turns on to allow the unit sensor to
accurately determine if more cooling is needed.
Cool - This mode is ideal on hot days to cool
and dehumidify the room quickly. Use the Temp
buttons to set the desired room
temperature and use the Fan Speed button to
set the desired fan circulation speed.
Fan - In this mode the fan circulates air but the
compressor does not run. Use the Fan Speed
button to set fan speed to High, Medium or Low.
In this mode, you cannot adjust the set
temperature.
Dry - This mode is ideal for rainy and damp
days to dehumidify the room rather than cooling
it significantly. Humidity is removed from the
room by the combination of compressor
operation and the fan speed fixed at Low. The
compressor and fan turn off once the set
temperature is reached. Fan speed cannot be
adjusted in Dry mode.
Wi-Fi
Enables connection of the air conditioner to
the home Wi-Fi.
• Wi-Fi Pairing : Mode + Fan Speed
• Wi-Fi Off : Power + Fan Speed
To Next Page
Loading...
