LG W86 - Wireless Speakers Connection

Connecting14
Connecting
2
Wireless speakers connection
LED indicator of wireless receiver
LED Color Operation
Blue The wireless receiver is receiving
the signal of the wireless
transmitter.
Red The Wireless Receiver is in
standby mode.
O (No
display)
The Wireless Receiver is turned
o.
Initial setting an ID of wireless
receiver
1. Connect the Wireless Receiver and the rear
speaker (right, left) with the speaker cables.
2. Connect the power cord of the Wireless
Receiver to the outlet.
3. Turn on the main unit and Wireless Receiver:
The main unit and wireless receiver will be
automatically connected.
Setting an ID of wireless receiver
When the unit is manufactured, the ID is already set.
If an interference occurs or you use a new wireless
receiver, an ID should be set again.
1. Press
n
HOME.
2. Use
AD
to select the [Setup] and press
b
ENTER. The [Setup] menu appears.
3. Use
WS
to select [AUDIO] option then press i
to move to the second level.
4. Use
WS
to select the [Connecting Speakers]
option then press
b
ENTER to move to the
third level.
The [Wireless Speaker Connection Guide]
appears.
5. Press PAIRING button on the wireless receiver.
- If you see the blue LED indicator light, pairing
was successful.
6. Use
WS
to select the [5.1 Speaker Setup] and
press
b
ENTER for wireless speaker connection
test.
HT806THW-A2_BMARLLK_ENG_0404.indd 14 2011-05-04 �� 2:12:26