To Next PageTo Next PageWhy does my LG WD-10490N show an imbalance error?
An imbalance error on your LG Washer can occur if the appliance is tilted, the laundry is gathered to one side, or non-distributable items are in the drum. Make sure the washer is on a level surface and redistribute the load evenly.
What to do if my LG WD-10490N Washer has a drain error?
A drain error on your LG Washer indicates that water hasn't drained sufficiently within 5 minutes. Ensure that the drain hose is not blocked or kinked.
What does a sensor pressure S/W error mean on my LG Washer?
A sensor pressure S/W error on your LG Washer indicates that the sensor pressure switch is out of order.
What to do if my LG WD-10490N Washer shows a door open error?
A door open error on your LG Washer can occur if the [Start/Pause] button is pressed while the door is open or if the door switch is malfunctioning. Ensure the door is properly closed before starting a cycle.
Why is my LG WD-10490N Washer showing an overflow error?
An overflow error on your LG Washer means that water is automatically being pumped out because there is too much water in the tub.
What causes a heating error on my LG WD-10490N Washer?
A heating error on your LG Washer indicates that the thermistor is out of order.
Highlights key features like Anti-Crease, Fuzzy Logic, Child-Lock, and low noise speed control.
Explains how Fuzzy Logic determines washing time based on temperature and laundry amount.
Details the water level control using a pressure sensor and its operation.
States that the door is secured and cannot be opened during operation.
Guides on removing transit bolts, placing the appliance on a firm surface, and adjusting feet for leveling.
Details various wash options like Rinse+, Crease Care, Bio, and Pre Wash for enhanced cleaning.
Explains the LED display, water temperature selector, and Child-Lock feature.
Provides safety precautions and general advice before starting troubleshooting.
Details the procedure to enter and use the Quality Control (QC) Test Mode.
Explains how to check water level frequency by pressing Temp. and Spin buttons.
Provides a step-by-step guide for diagnosing and resolving common abnormal operations like no power or water inlet issues.
Provides step-by-step instructions for disassembling the control panel of the washing machine.
Details the process for disassembling the detergent dispenser assembly and its related parts.
Explains how to disconnect and remove the inlet valve, including wiring details.
Guides on removing the lower cover cap and the lower cover itself.
Instructions for opening the door completely and removing the door assembly.
Step-by-step guide on how to safely open, clean, and reassemble the drain pump filter.
Diagram illustrating the exploded view of the washing machine's cabinet assembly and its components.
Exploded view diagram of the control panel and detergent dispenser assembly.
Exploded view diagram showing the drum and tub assembly components.
General
