To Next PageTo Next PageWhy does my LG WD-10480T show an imbalance error?
An imbalance error on your LG Washer can occur if the appliance is tilted, the laundry is gathered to one side, or non-distributable items are in the drum. Make sure the washer is on a level surface and redistribute the load evenly.
What to do if my LG WD-10480T has a drain error?
A drain error on your LG Washer indicates that water hasn't drained sufficiently within 5 minutes. Ensure that the drain hose is not blocked or kinked.
What does a sensor pressure S/W error mean on my LG Washer?
A sensor pressure S/W error on your LG Washer indicates that the sensor pressure switch is out of order.
What to do if my LG Washer shows a door open error?
A door open error on your LG Washer can occur if the [Start/Pause] button is pressed while the door is open or if the door switch is malfunctioning. Ensure the door is properly closed before starting a cycle.
Why is my LG WD-10480T Washer showing an overflow error?
An overflow error on your LG Washer means that water is automatically being pumped out because there is too much water in the tub.
What causes a heating error on my LG Washer?
A heating error on your LG Washer indicates that the thermistor is out of order.
General| Power consumption (typical) | 2100 W |
|---|---|
| Water consumption per cycle | 69 L |
| Energy consumption washing per cycle | 1.2 kWh |
| Display type | LED |
| Loading type | Front-load |
| Product color | White |
| Door opening angle | 180 ° |
| Appliance placement | Freestanding |
| Washing class | A |
| Power requirements | AC 220 - 240V, 50Hz |
| Drum capacity | 7 kg |
| Delay start (max) | 19 h |
| Spin-drying class | B |
| Maximum spin speed | 1000 RPM |
| Delayed start timer | Yes |
| Number of washing programs | 16 |
Weight and Dimensions| Depth | 550 mm |
|---|---|
| Width | 600 mm |
| Height | 842 mm |
| Weight | 65000 g |
Key features: Anti-Crease, Fuzzy Logic, Child-Lock, noise control, Auto Restart.
Fuzzy Logic determines washing time based on water temp and laundry amount.
Pressure sensor controls water level; stops supply at preset, proceeds after reduction.
The door is inaccessible during program operation to prevent accidental opening.
Details wash options: Rinse+ for extra rinse, Crease Care, Bio for stains, Pre Wash for heavy soil.
Explains LED display for remaining time and error code indications.
How to use selector to choose water temperature for programs.
How to set/cancel Child Lock to prevent unintended operation.
Procedure for activating and using QC Test Mode for diagnostics.
Lists/explains error codes (IE, UE, DE, FE, PE, dE, EE) and their causes.
Troubleshooting for common issues: no power, water inlet, tilted appliance.
Troubleshooting for door open errors/drain malfunctions, checking door switch/hose.
Addresses suds overflow by checking detergent type/amount and softener issues.
Troubleshooting for "No Power": check outlet voltage, fuse, harness, PWB.
Troubleshooting locked buttons, focusing on Child Lock feature and cancellation.
Resolve "No Water Supply": check tap, filter, valve resistance, voltage.
Troubleshooting detergent flow: check supply, connections, dispenser.
Troubleshooting softener flow: check dispenser, cap, connections.
Diagnosing abnormal sounds (pulley, belt, motor) and suggesting fixes.
Troubleshooting heating issues without water, checking sensor/PWB.
Fix drain malfunctions: check hose, impeller, connector, pump.
Troubleshooting heater problems: check voltage, resistance, thermistor.
Resolve continuous heating: check thermistor placement/resistance.
Troubleshooting spin issues: check sensor, motor connections, PWB.
Step-by-step guide for disassembling the control panel.
Instructions for disassembling dispenser assembly and related parts.
Steps for safely disconnecting and removing the inlet valve.
How to open and remove the lower cover cap.
Procedure for removing the washing machine door.
Instructions for removing/reassembling door and tub gaskets.
Detailed steps to clean drain pump filter, including water removal.
Steps for disassembling pulley, motor, and damper components.
Instructions for removing water pump assembly.
Procedure for removing heater element from tub.
Steps for removing and reinstalling thermistor.
Instructions for disassembling door lock switch assembly.
How to remove foreign material stuck between drum and tub.
Exploded view of cabinet assembly and its components.
Exploded view of control panel and dispenser assembly parts.
Exploded view of drum and tub assembly, detailing internal parts.
