What does 'EEPROM Error' mean on my LG Washer?
An 'EEPROM Error' on your LG Washer means the EEPROM is out of order. This error is only displayed when the START/PAUSE button is first pressed in the Load Test Mode.
What does 'Thermistor Error' mean on my LG WD-10580BD?
A 'Thermistor Error' on your LG Washer indicates that the thermistor is out of order.
What does 'Pressure Sensor Error' mean on my LG WD-10580BD?
A 'Pressure Sensor Error' on your LG Washer indicates that the sensor switch assembly is out of order.
What causes a 'Locked Motor Error' on an LG WD-10580BD?
A 'Locked Motor Error' on your LG Washer can occur for several reasons: 1. The connector in the motor harness is not connected to the connector of the stator assembly. 2. The electric contact between the connectors in the motor harness and the connector in the main PWB assembly is bad or unstable. 3. The motor harness between the stator assembly and main PWB assembly is cut. 4. The hall sensor is out of order or defective. Check these components to troubleshoot the error.
What does 'Drain Error' mean on my LG Washer?
A 'Drain Error' on your LG Washer indicates that the appliance hasn't fully drained within 10 minutes.
What to do if my LG WD-10580BD experienced a power failure?
If your LG washer experienced a power failure, restart the cycle.
What to do if my LG WD-10580BD overfills with water?
If the water overfills in your LG washer due to a faulty water valve, close the water tap, unplug the power plug, and call for service.
Why is the water supply not adequate to my LG WD-10580BD Washer?
If your LG washer has a water supply issue, verify there is adequate water supply in your area. Ensure the water supply taps are fully open and that the water inlet hose isn't bent. Check the filter of the inlet hose for any clogs.
What does 'Over Flow Error' mean on my LG WD-10580BD Washer?
An 'Over Flow Error' on your LG Washer indicates that the water is overflowing, meaning the water level frequency is over 213. If this error is displayed, the drain pump will automatically activate to drain the water.
Why does my LG Washer show an imbalance error?
If your LG Washer displays an imbalance error, it could be due to several factors. The load might be too small, the appliance could be tilted, the laundry might be gathered to one side, or non-distributable items are in the drum. Check these potential causes to resolve the issue.
General| Loading type | Front loading |
|---|---|
| Color | White |
| Delay Start | Yes |
| Child Lock | Yes |
| Noise Level (Wash/Spin) | 72 dB |
| Dimensions (HxWxD) | 850 x 600 x 550 mm |
To Next Page
