18
ow to use the washer
Child lock
If you choose to lock the buttons on the
control assembly to prevent tampering, this
function may be selected.
• Child lock can be set by pressing and
holding the Option and Rinse button
simultaneously.
(About three seconds)
• When child lock is set, all buttons are
inoperable, except Power button.
• To deactivate Child lock system, press and
hold the
Option
and
Rinse
button
simultaneously again. (About three seconds)
• To change to the desired program, whilst in
child lock mode.
1. Press and hold both
Option
and
Rinse
button together once again.
(About three seconds)
2. Press the Start/Pause button.
3. Select the desired program and press the
Start/Pause button again.
• The child lock can be set at any time and it
is automatically canceled when operational
errors occur. Also Child lock works when
power is off.
Rinse
• By pressing the Rinse
button,the Rinse type can
be selected.
1. Normal
• Cotton, Synthetic, Baby Care performs 3
Rinses
• Wool/Silk, Hand Wash, Quick 30, Delicate,
Duvet performs 2 Rinses
• Used to additional rinse, which may assist
in removing traces of detergent residue.
• By selecting Rinse
+
function,
the Rinse time and the Rinse water are
increased.
• Is selected by pressing the Rinse button
repeatedly this function leaves clothes in the
washer; suspended in the water after a rinse
without entering into spin.
• To proceed through to a drain or spin, once
the rinse hold function is completed using to
program dial scroll to the required program.
3. Rinse Hold
• For high effectiveness or more purity in rinse
operation you can choose Medic Rinse
option.
• Available in Cotton, Synthetic and Baby Care
program.
The required lamp will light up for
identification.
4. Medic Rinse
2. Rinse
+
H
To Next Page
Loading...
