20
ow to use washer
H
WashStart/Pause
• This Start/Pause button is used to start
wash cycle or pause the wash cycle.
• If temporary stop of wash cycle is needed,
press “Start/Pause” button.
• When in Pause, the power is turned off
automatically after 4 minutes.
NB. The door will not open before 1 to 2
minutes when Pause is selected, or at
the end of the wash cycle.
1. Start
• Use this option for loads that need
pretreatment. This adds 16 minutes of pre
washing before draining.
- When using Pre Wash option, do not use a
liquid detergent for the main wash.
Use powder for the main wash.
1. Pre Wash
• If the laundry is heavily soiled “Intensive”
option is effective.
• By selecting the Intensive option, the wash
time may be extended, depending on the
program selected.
• To use this option select the Intensive option
once before the wash programe is started.
2. Intensive
• This option is automatically selected in
every course except for Rinse+Spin.
3. Normal
• This cycle is suitable for lightly soiled clothing.
4. Light
• Use this option when you want to wash
slippers or shoes.
※※
Depending on the usage condition, steam
could not be operated.
5. Shoes Wash
2. Pause
• Lights whenever the door of the washer is
locked.
• The door can be unlocked by pressing the
Start/Pause button to stop the washer.
• The door can be opened after a short delay.
Door Lock
• While the "Detecting" is shown in the display
the machine rotates slowly and detects how
many laundries are loaded in the drum.
It will take a few seconds.
Detecting
To Next Page
Loading...
