What does DRAIN ERROR mean on my LG WD-1485RD Washer?
- JJohn HendersonAug 6, 2025
If your LG Washer displays a DRAIN ERROR, it means the appliance hasn't fully drained within 10 minutes.
What does DRAIN ERROR mean on my LG WD-1485RD Washer?
If your LG Washer displays a DRAIN ERROR, it means the appliance hasn't fully drained within 10 minutes.
What to do if I get a DOOR OPEN ERROR on my LG WD-1485RD Washer?
If you see the DOOR OPEN ERROR on your LG Washer, and you're using the reservation function, or another function, start by closing the door. This should resolve the error. If that doesn't work, it could indicate that the door switch is malfunctioning.
Why does my LG WD-1485RD show an IMBALANCE ERROR?
If your LG Washer displays an IMBALANCE ERROR, it could be due to a couple of reasons. First, check if the appliance is tilted. Second, make sure the laundry isn't gathered to one side inside the drum.
What causes a MOTOR ERROR on my LG WD-1485RD Washer?
If your LG Washer displays a MOTOR ERROR, it could be due to a disconnection in the LEAD WIRE ASSEMBLY. Reconnect or repair the connector. Alternatively, the hall sensor might be defective, requiring a replacement of the STATOR ASSEMBLY.
Why is my LG Washer showing a WATER INLET ERROR?
If your LG Washer displays a WATER INLET ERROR, it means that the water level hasn't reached the required level (246) within 8 minutes after water supply started, or it hasn't reached the preset water level within 25 minutes.
What should I do if my LG Washer shows a DRY HEATOR ERROR?
If your LG Washer displays a DRY HEATOR ERROR, the Dry Heater might be out of order and needs replacement. It could also mean that the connector of the Dry Heater isn't properly connected to the connector in the Main PWB ASSEMBLY; try reconnecting or repairing the connector. Another possibility is that the Dry fan motor is faulty and needs replacement.
Capacity | 8 kg |
---|---|
Spin Speed | 1400 RPM |
Energy Rating | A+++ |
Noise Level (Spin) | 75 dB |
Color | White |
Type | Front Load |
Overview of key features like auto process, intelligent wash, and direct drive.
Explains fuzzy logic for determining wash time based on temperature and load.
Describes the water level control mechanism using a pressure sensor.
Instructions for connecting the water inlet hose to the washing machine.
Guidelines for connecting the drain hose to ensure proper drainage.
Procedures for safely connecting the power plug to the electrical outlet.
Pre-service checks to perform before troubleshooting to avoid electric shock.
Details on activating and using the Quality Control test mode for diagnostics.
Method to check water level frequency readings for diagnosing issues.
Procedures to check thermistor temperatures for operational conditions.
Explains error codes displayed by the machine and their potential causes.
Step-by-step guide to diagnose and resolve common abnormal operations.
Detailed troubleshooting for specific faults like no power or no water supply.
Steps to disassemble the washing machine's control panel assembly.
Instructions for removing and disassembling the main PWB (Printed Wiring Board).
Guide on how to disassemble the detergent dispenser assembly.
Procedure for disconnecting and removing the water inlet valve.
Steps for disassembling the washing machine door and its components.
Instructions on how to remove and reassemble the tub gasket.
Procedures for disassembling motor components and friction dampers.
Steps to remove the circulation or drain pump from the washing machine.
Guide on how to remove the washing heater element.
Procedure for removing the thermistor component.
Steps to disassemble the door lock switch assembly.
Instructions for removing the dry duct assembly components.
Guide on how to disassemble the condensing duct.
Exploded view and part list for the washing machine's cabinet assembly.
Exploded view of the control panel and dispenser assembly components.
Exploded view of the drum and tub assembly parts.
Exploded view of the dryer component assembly.