Connect the power plug to
the outlet.
Connect the inlet hose.
Preparation Press the POWER button. Press
the
Start/Pause
for washing. button.
Press the Wash/Rinse button Check if the drum rotates Check if water is supplied
and the present temperature will
clockwise and counterclockwise.
through the detergent dispenser.
be displayed.
Power off.
Check if the door can be
opened after 3 minutes.
• Power off and power on.
• Press the Spin Speed button.
• Press the Start/Pause button.
• Check the spin and drain
functions.
If SVC is needed, remove the
remaining water by pulling out
the hose and removing the
cap.
Check the water heating Check automatic reverse Check the water supply.
function. rotation.
Check drain and spin
Power off and open the
Water removal
functions. door
TEST OPERATION
To Next Page
Loading...
