① Disassemble the cabinet cover.
② Separate the pump hose and the bellows from
the pump assembly.
③ Disassemble the pump assembly in arrow
direction.
① Disassemble the back cover.
② Separate 2 connectors from the heater.
③ Loosen the nut and pull out the heater.
① Disassemble the back cover.
② Unplug the white connector from the
thermistor.
③ Pull it out by holding the bracket of the
thermistor.
35
• When assembling the heater, insert the heater
into the heater clip on the bottom of the tub.
• Tighten the fastening nut so the heater is
secure.
To Next Page
Loading...
