10
5. OPERATION
LED display
Display the estimated remaining time
(Hour : Minute) to finish.
In case of abnormal operation, error
indications are displayed.
( )
See troubleshooting guide.
Water temperature selector
Press the button to select water
temperature.
95 C is selected for Cotton only.
By pressing the button while
operating the washer, the present
temperature is displayed.
Wash program selector
8 program can be set depending on the type of the laundry.
If the power button is pressed, Cotton program is automatically
set.
By turning the dial, [Cotton
-
Synthetic
-
Wool/Silk
-
Hand Wash
-
Drain
-
Rinse+Spin
-
Quick 30
-
Delicate ]can be selected.
(The opposite is possible)
Start/Pause button
Use the button to start or
pause wash cycle.
The power turns off
automatically 4 minutes
after the pause button is
pressed.
• If the laundry is heavily
soiled “Intensive” option
is effective.
• By selecting the
Intensive option, the
wash time may be
extended, depending on
the program selected.
• Is selected by pressing the Rinse Hold
button this function leaves clothes in
the machine; suspended in the water
after a rinse without entering into spin.
• To proceed through to a drain or spin,
once the rinse hold function is
completed using to program dial scroll
to the required program. (Spin)
Intensive Rinse Hold
To Next Page
Loading...
