To Next Page
J
Jose MurrayJul 29, 2025
Why does my LG WD-14120(5)RD Washer show a drain error?
- SSarah StevensJul 30, 2025
Your LG Washer may show a drain error because it has not fully drained within 5 minutes.
Why does my LG WD-14120(5)RD Washer show a drain error?
Your LG Washer may show a drain error because it has not fully drained within 5 minutes.
General| Maximum Spin Speed | 1400 RPM |
|---|---|
| Energy Rating | A+++ |
| Spin Speed | 1400rpm |
| Color | Red |
| Inverter Motor | Yes |
| Load Type | Front Load |
| Noise Level (Wash/Spin) | 53 dB / 72 dB |
| Dimensions (HxWxD) | 850 x 600 x 640 mm |
Details on automatic wash-dry, intelligent wash system, direct drive, child-lock, and auto-restart.
Explains how fuzzy logic determines washing time based on temperature and laundry amount.
Describes the pressure sensor system for water level detection and control.
Lists included accessories such as inlet hose and spanner.
Details on removing transit bolts, placing on a firm surface, and leveling the appliance.
Explains how to set, cancel, and the effects of the child lock system.
Details on setting a delayed start time for washing cycles.
Instructions for starting, pausing, and changing programs using the Start/Pause button.
Describes how to select different washing programs using the control dial.
Option to reduce wash program time; not available with Quick 30 program.
Explains display of remaining time, error codes, and cycle completion messages.
Shows whether the door can be opened or not during washing.
Function of the button to turn power on and off.
How to select dry programs and time options.
Buttons for changing wash method, rinse times, and spinning speed.
How to select water temperature for different programs.
Safety precautions and initial checks before performing service.
Procedure for entering and using the Quality Control test mode.
Method to check water level frequency using Rinse and Spin buttons.
How to check thermistor temperatures using specific button combinations.
Lists error codes, their symptoms, and potential causes for various errors.
Flowcharts for diagnosing and resolving common abnormal operations.
Detailed troubleshooting steps for various faults like no power or water supply issues.
Steps for removing the control panel and its associated assemblies.
Procedure for removing the power PWB assembly and its connectors.
Steps to disassemble the dispenser assembly and its components.
Instructions for disconnecting and removing the inlet valve assembly.
Steps to remove the lower cover of the appliance.
Procedure for removing the door and its components.
Method for draining any remaining water from the appliance.
Steps for releasing and removing the cabinet gasket clamp and screws.
Instructions for removing rotor, stator, and friction damper components.
Steps to remove the pump, including outlet hose, bellows, and wiring.
Procedure for loosening the nut and removing the washing heater.
How to pull out the thermistor by holding the bracket.
Steps for removing cabinet cover clamp, gasket, screws, and door lock switch.
How to remove foreign objects stuck between the drum and tub.
Steps for removing the dry fan assembly, dry duct upper, dry heater, and thermostat.
Procedure for removing screws from the cabinet and the condensing duct.
Exploded view and part numbers for the cabinet assembly.
Exploded view and part identification for control panel and dispenser assemblies.
Exploded view and part identification for the drum and tub assemblies.
Exploded view and part identification for the dryer assembly components.
