LG WD-1481RD - DISPENSER ASSEMBLY; INLET VALVE; DOOR; Removing method of remained water

30
 The back cover is removed.
 Two screws are unscrewed.
 Disconnect connector from the wiring.
 Pull the PWB assembly (Main) to arrow
direction.
 The plate assembly(Top)and the
cover(lnner)are disassembled.
 Pull the drawer to arrow direction.
 Two screws are unscrewed.
 The hose clamps and the hose are
disassembled.
 The ventilation bellows are disassembled on
the tub.
PWB ASSEMBLY(MAIN)
DISPENSER ASSEMBLY
DISPENSER ASSEMBLY
DRAWER