LG ( 6023C / 8023C / 1023C) SUPER-SLIM WASHING MACHINES
Page 7
3-Operation / Set-up the W/M
Placing the Washing Machine:
The transport safety bolts must be removed before any operation of the machine (Figure-
1). Bolt heads, marked as “C”, should be turned counter-clockwise direction and loosened
with a proper tool. Plastic taps, supplied inside the protective bag and designated as “P”,
should be placed to the safety-bolt holes according to the direction being showed. Please
keep the safety bolts for future transportation and place them before transporting
your machine
Figure-1
The machine is configured to operate at 220VAC, for this reason if the power supply is
110VAC, a 3000Watt 110/220V transformer should be used.
Connect the power cord to the appropriate electrical system, which is being supported by
the maximum voltage and current rating indicated on the rating plate. The appliance
should be so positioned that the plug is accessible.
In order for quiet and stable operation, the machine should be placed properly and leveled
on its feet. Your machine comes with two adjustable feet. If the machine is unstable,
loosen the plastic counter nut and screw or unscrew the adjustable foot until the machine
is leveled perfectly (Figure-2). After positioning, tighten the counter nut for stability.
To Next Page
Loading...
Need help?
General
