What to do if my LG WD-8050F displays a DRAIN ERROR?
If your LG Washer shows a DRAIN ERROR, it means water hasn't drained sufficiently within 5 minutes. Check the drain hose and filter for any blockages that may be preventing proper drainage.
Why does my LG Washer have an IMBALANCE ERROR?
An IMBALANCE ERROR on your LG Washer typically occurs because the appliance is tilted, the laundry is gathered to one side, or non-distributable items are in the drum. To resolve this, rearrange the load evenly within the drum and ensure that the appliance is level.
What to do if my LG Washer shows a DOOR OPEN ERROR?
If your LG Washer displays a DOOR OPEN ERROR, it could be due to the Start/Pause button being pressed while the door is open, or the door switch may be faulty. Ensure the door is securely closed. If the problem persists, the door switch may need to be replaced.
What to do if my LG WD-8050F shows a WATER INLET ERROR?
If your LG Washer displays a WATER INLET ERROR, it indicates that water hasn't reached the expected level within the allotted time. Check the water supply to ensure it is not blocked, as this is a common cause.
LG's jumbo drum offers increased capacity compared to conventional models, improving wash performance.
Optimal washing time is determined by sensing water temperature, selected temperature, and laundry amount for best performance.
Utilizes a pressure sensor to monitor and control water levels within the tub during operation.
The door remains locked during program operation or when the Door Lock light is illuminated.
Illustrations and identification of included accessories such as inlet hose and spanner.
Covers removing transit bolts, proper appliance placement on a firm surface, and horizontal adjustment.
Instructions for connecting the inlet hose, drain hose, and power plug correctly and safely.
Detailed step-by-step guide for performing a test operation, from preparation to final water removal.
Explanation of LED display, water temperature selector, error indicators, and door lock lamp functionality.
Details on manual wash controls, rinse hold, program selection, start/pause, power, delay, and Eco/Rapid functions.
Essential checks before service, test mode procedures, and method to check water level frequency.
Details on error display codes, symptoms, causes, and initial diagnosis for abnormal operations.
Guides service calls for abnormal operations like 'NO POWER' and 'Water inlet trouble' with diagnostic questions.
Step-by-step guides to diagnose and resolve faults related to power, water, detergent, heating, drain, spin, and sound.
Guides service calls for abnormal operations like 'NO POWER' and 'Water inlet trouble' with diagnostic questions.
Comprehensive troubleshooting for various faults including no power, water issues, heating, drain, and spin problems.
Steps for disassembling the control panel, PWB Assy (Power), and dispenser assembly.
Instructions for disassembling inlet valve, reactor, main PWB, lower cover, door, gasket, and pulley/motor.
Procedures for removing the pump, heater, and thermistor components.
Exploded view and comprehensive part list for the washing machine's cabinet assembly.
Exploded diagram illustrating the components of the control panel and dispenser assembly.
Exploded diagram showing the components of the drum and tub assembly.
To Next Page
General