£GTEST OPERATION
9
ƒUConnect the power plug to ƒUIn case of Coloreds program.
the outlet.
ƒUConnect the inlet hose.
Preparation for Press the power button. Press
the
START/PAUSE
washing. button.
¡⁄Press the button ¡ATEMP¡B ¡⁄Check if the drum rotates ¡⁄Check if water is supplied
and the present temperature will
clockwise and counterclockwise.
through the detergent dispenser.
be displayed.
¡aWD-1050F(H)/1250F(H)¡b
¡⁄Power off and then power on.
¡⁄Check if the door can be
opened after Door Lock lamp
turns off.
¡⁄Turn off Wash and Rinse after
pressing the Start/Pause button
and start the machine again.
¡⁄Check drain and Spin.
¡⁄If SVC is needed during
check, remove
the remaining water by pulling
out the hose cap.
Check the water heating. Check automatic reverse Check the water supply.
turn.
Check drain and spin
Power off and open the
Water removal
door
To Next Page
Loading...
Need help?
General
