¢ Before servicing ask troubles of customers
¢ Check the adjustment(power supply is 220-240V, remove the transit bolts....)
¢ŁCheck the troubles referring to the trouble shooting.
¢ØDecide service steps referring to disassembly instructions.
¢ŒAnd then, service and repair.
¢ºAfter servicing, operate the appliance whether it works O¡⁄K or NOT.
¡ÆSTANDARD INSTALLATION
The appliance should be installed as follows.
REMOVE THE TRANSIT INSTALL THE APPLIANCE ADJUST THE
BOLTS ON FLAT AND FIRM SURFACE HORIZONTAL
ƒURemove the transit bolts ƒUTurn the leveling feet to
(4EA:¤ )with supplied spanner. set the appliance horizontally.
ƒUKeep the transit bolts and
spanner for future use.
ƒUThe appliance goes up by
rotating the feet clockwise.
ƒUThe appliance come down by
rotating the feet counter
clockwise.
4. INSTALLATION
7
To Next Page
Loading...
Need help?
General
