To Next PageTo Next PageWhy does my LG Washer say door open error?
A door open error on your LG Washer typically means one of two things: * The Start/Pause button was pressed while the door was open. * The door switch is malfunctioning.
Why does my LG WD(M)-8070F(H)(B) have a water inlet error?
Your LG Washer might show a water inlet error if water hasn't reached the preset level within 4 minutes of the inlet valve opening, or if water hasn't reached the normal level within 25 minutes.
What causes a current error on my LG WD(M)-8070F(H)(B)?
A current error on your LG Washer can be caused by: * A faulty PWB assembly (Main). Replace the PWB assembly (Main). * A short-circuited winding in the MOTOR. Replace the MOTOR.
What does a heating error mean on my LG Washer?
A heating error in your LG Washer indicates that the thermistor is out of order.
What does sensor pressure S/W error mean on my LG WD(M)-8070F(H)(B) Washer?
A sensor pressure S/W error indicates that the sensor pressure switch is out of order.
Details the standard installation procedure for the appliance.
Instructions for entering and using the QC Test Mode for diagnostics.
List of error codes, symptoms, and their causes.
General error diagnosis and checklist for abnormal operations.
Step-by-step guide for diagnosing and resolving common abnormal operations.
Detailed fault diagnosis and troubleshooting procedures.
Troubleshooting guide for issues related to water supply.
Troubleshooting steps for problems with detergent dispensing.
Troubleshooting for issues where softener is not dispensed.
Guide to diagnose and resolve unusual noises during operation.
Troubleshooting for heating element issues when no water is present.
Diagnosing and fixing continuous heating issues.
Troubleshooting steps for problems with the drain system.
Diagnosing and resolving problems with the wash heater.
Troubleshooting guide for issues during the spin cycle.
General
