30
Be sure to unplug the machine out of the outlet before disassembling and repairing the parts.
10. DISASSEMBLY INSTRUCTIONS
Unscrew 2 screws on the back of the top plate
assembly.
Pull the top plate backward and upward as shown.
Disconnect the PWB assembly (Display) connector.
Pull out the drawer and unscrew 3 screws.
Push 2 upper hooks down and pull the control panel.
Pull out the Rotary (Dial) knob.
Disconnect the PWB assembly (Display) from the
control panel by pushing 5 hooks down and
unscrewing 1 screw.
To Next Page
Loading...
