LG WD(M)-80230FB - User Manual

Questions and Answers

R
rebecca03Jul 29, 2025
How to fix a lock error on my LG WD(M)-80230FB?
- R
  Rachel HillJul 30, 2025
  A lock error on your LG Washer can occur due to several reasons: • The Connector (3-pin, male, white) in the wire harness is not connected to the Connector (3-pin, female, white) of MOTOR. Suggested solution: Reconnect or repair the connector. • The electric contact between the connectors 3-pin, male, white in the wire harness and 6-pin, female, white in the PWB ASSEMBLY (Main) is bad or unstable. Suggested solution: Reconnect or repair the contact in the connector. • The wire harness between the MOTOR and PWB ASSEMBLY (Main) is cut (open circuited). Suggested solution: Repair the damaged (open-circuited) WIRE HARNESS. • The hall sensor is out of order/defective. Suggested solution: Replace the PWB ASSEMBLY (Main).
L
Laura LesterAug 2, 2025
Why does my LG WD(M)-80230FB Washer have an imbalance error?
- R
  rlawsonAug 3, 2025
  An imbalance error on your LG Washer means that the appliance is tilted, the laundry is gathered to one side, or non-distributable items are in the drum.
M
Megan BarrAug 7, 2025
What does it mean if my LG Washer shows an overflow error?
- C
  Colton ThomasAug 7, 2025
  An overflow error on your LG Washer indicates that water is automatically being pumped out because there is too much water in the tub.
O
olivia51Aug 16, 2025
Why does my LG WD(M)-80230FB Washer have a water inlet error?
- T
  Tom TaylorAug 16, 2025
  A water inlet error on your LG Washer means that water has not reached the pre-set level within 4 minutes since the inlet valve operated, or water has not reached the normal level within 25 minutes.
H
Hannah CookeAug 20, 2025
What does it mean if my LG WD(M)-80230FB displays a current error?
- N
  Nicholas BeltranAug 20, 2025
  If your LG Washer displays a current error, it indicates that the PWB ASSEMBLY (Main) is out of order (replace the PWB ASSEMBLY (Main)), or the winding in the MOTOR is short-circuited (replace the MOTOR).
M
Michael BooneAug 25, 2025
What does it mean if my LG WD(M)-80230FB displays a heating error?
- R
  Ricky MartinAug 25, 2025
  If your LG Washer displays a heating error, it indicates that the thermistor is out of order.
E
Ethan HarrisNov 10, 2025
What to do if my LG WD(M)-80230FB displays a sensor error?
- E
  Elizabeth JohnsonNov 10, 2025
  If your LG Washer displays a sensor error, it could be due to several reasons: • Bad or unstable electric contact between the connectors (5-pin, male in the wire harness and 5-pin, female in the hall sensor). Suggested solution: Reconnect or repair the contact in the connector. • The connector (6-pin, male, natural) in the wire harness is not connected to the connector (6-pin, female, natural) of PWB ASSEMBLY (Main) or the electric contact of connectors is bad/unstable. Suggested solution: Reconnect or repair the contact in the connector. • Bad or unstable electric contact between the connectors 6-pin, male, in the wire harness and 6-pin, female in the controller (Main). Suggested solution: Reconnect or repair the contact in the connector. • The Wire Harness between hall sensor in the MO...