Press the RINSE button to
select the desired no. of rinse
cycles.
When you want to only
drain, press SPIN button.
Then press START/PAUSE
button.
Wait until the water in the
washing tub drains completely
and then press POWER button
to finish the activity.
(Add detergent only where wash cycle is selected)
When you only need the SPIN, RINSE/SPIN,RINSE, WASH/RINSE, WASH, WASH/
RINSE/SPIN these can be set manually.
When a RINSE, WASH/RINSE, WASH option is selected, after the wash is completed the water will not be drained
off. If you wish to drain the water, press SPIN button after that press the START/PAUSE button and wait until the
water in the tub has drained completely.
(Not applicable for only spin process).
31
To Next Page
Loading...
Need help?
General
