15
Before Starting to Wash
t.
* Because the detecting ability of the sensor may be decreased by using it for a long time, periodically use
TUB CLEAN course to clean the tub. (refer to page 21)
* Even if the water level is changed by the user in FUZZY(Normal) Program,
the sensor will still work. The sensor algorithm may differ according to models.
* The control panel may differ according to different models.
DELAY START (RESERVATION) BUTTON
• Use to set a delayed finishing time.
• The time increases when the button
is pushed.
• The following settings are indicated
as the button is pushed 3
4 5
... 11 12 14 16 ...46 48
3 HOUR.
• To cancel delay time, turn the power
switch off.
(refer to page 24)
START/PAUSE BUTTON
• Use to start or pause the
washing process.
• Repeats start and pause by
pushing the button.
PROGRAM BUTTON
• Use for selecting wash program.
• This button allows you to select 8
different programs for different kinds of
laundry and dirtiness.
• program selections light up in sequence as
follows: FUZZY(Normal)
WOOL
QUICK WASH JEANS SMART
CLEANING SILENT FAVORITE
TUB CLEAN FUZZY(Normal) etc.
Select the desired program by pressing the
button.
TION
the
vent
NSE
o
e
TIME LEFT, DELAY START (RESERVATION), ALARM INDICATION
• Time left - During operation, the remaining time is indicated.
• DELAY START INDICATION (RESERVATION) - When DELAY
START (RESERVATION) program is selected, it indicates the finishing
time. (RES.=DELAY)
• Alarm indication - When an error occurs, an error message appears to
indicate the abnormality.
For example, indicates that the lid is open.
e
ram.
SMARTDIAGNOSIS
TM
FUNCTION DISPLAY
•
It marks the place to put the
phone to receive signal when a
problem occurs.
POWER (AUTO OFF)
BUTTON
•
Use to turn the power on or off.
•
Push again and power goes on or off
• The power goes off automatically
about 10 seconds after the wash is
finished.
To Next Page
Loading...
