LG WM0532HW - Page 38

37
1.
Disassemble the cabinet cover.
2.
Separate the pump hose, the bellows
and the circulation hose assembly from the
pump assembly.
3.
Disassemble the pump assembly in arrow
direction.
1.
Disassemble the cabinet cover.
2.
Separate 2 connectors from the heater.
3.
Loose the nut and pull out the heater.
1.
Disassemble the cabinet cover.
2.
Unplug the white connector from the thermistor.
3.
Pull it out by holding the bracket of thermistor.
CAUTION
• When assembling the heater, insert the heater
into heater clip on the bottom of the tub.
• Tighten the fastening nut so the heater
is secure.
All manuals and user guides at all-guides.com