HOW TO USE THE WASHER
EN GLISH
15
• Custom Program allows you to store a customized
wash cycle for future use.
• To make a Custom Program:
1. Select a cycle.
2. Select Wash/Rinse Temperature, Spin Speed,
and Soil Level.
3. Select other desired Options.
4. Press and hold Custom Program button 3
seconds (2 beep sounds).
The Custom program is now stored for future
use. To reuse the program, select Custom
Program and press Start/Pause .
5. Custom Program
• Press repeatedly to adjust the volume of the
Beeper.
9. Beeper
• Select a water temperature based on the type of
load you are washing.
• Follow the fabric care label and chart below for
best results.
• Warm rinses leave the loads dryer than cold
rinses. Warm rinses increase wrinkling.
• In cold climates, a warm rinse makes the load
more comfortable to handle.
• Cold rinses save energy.
• The Cold rinse temperatures depend on the cold
water at your faucet.
• Warm rinses are regulated at approximately
86°F (30°C).
• For the Tap Cold/Cold setting, both wash and rinse
temperatures depend on the cold water at your
faucet.
6. Wash/Rinse Temperature
• To change the spin speed, press the Spin Speed
button repeatedly to cycle through available
options.
• To start Drain/Spin cycle:
1. Press Power button to turn on.
2. Press Spin Speed button only.
3. Press Start/Pause button.
7. Spin speed
• To change the soil level, press the Soil Level
button repeatedly until the desired setting is on.
8. Soil Level
Suggested Wash Temp.
Garment
Extra Hot Kitchen towels, sheets,
167°F (75°C) and baby garments
Hot Whites and Heavy
122°F (50°C) soiled color-fast items
Warm
Most loads
104°F (40°C)
Cold Brightly colored items,
77°F (25°C) washable woolens
To Next Page
Loading...
Need help?
General
