To Next PageTo Next PageWhy is the wash cycle time delayed on my LG WM2032HW?
The wash cycle time on your LG Washer may vary depending on several factors, including the amount of laundry, water pressure, water temperature, and other usage conditions. The wash time will increase if an imbalance is detected or if the suds removing program operates.
Why won't my LG WM2032HW Washer start or spin?
If your LG Washer isn't starting or spinning, there are several possible causes. Ensure the electrical power cord is securely plugged into the wall outlet. Check your house fuse or circuit breaker; reset the breaker or replace the fuse if necessary. Make sure the water supply tap is turned on. Also, verify that the door is firmly shut. Close the door completely and press the Start/Pause button, noting that it may take a few moments for the washer to begin spinning after the door locks.
How to fix water leaks in my LG WM2032HW?
If your LG Washer is leaking, there are several things you can check. Ensure the fill hose connection is tight at both the tap and the washer. Inspect your house drain pipes for clogs and unclog them if necessary, contacting a plumber if needed. Reduce the amount of detergent you're using or switch to a low-sudsing detergent. Check that the water supply is adequate by testing another tap in the house and ensure the water supply tap is fully open. Straighten any bends in the water inlet hose and check the filter of the inlet hose for clogs. Finally, inspect the drain hose for bends or clogs, cleaning and straightening it as needed, and clean the drain filter.
Why does my LG Washing machine show an imbalance error?
An imbalance error in your LG washing machine can occur for several reasons: * The load is too small. * The appliance is tilted. * Laundry is gathered to one side. * Non-distributable items are in the drum.
Why is my LG Washing machine showing a DRAIN ERROR?
A DRAIN ERROR on your LG washing machine indicates that the machine did not fully drain within 10 minutes.
What if the water supply is not adequate for my LG WM2032HW?
If the water supply to your LG washer is inadequate, check another tap in the house to see if the water pressure is generally low. Ensure that the water supply taps connected to the washer are completely open. Inspect the water inlet hose for any bends and straighten it. Also, check the filter of the inlet hose for any clogs.
What to do if water overfills in my LG WM2032HW?
If water is overfilling in your LG Washer due to a faulty water valve, close the water tap, unplug the power plug, and call for service.
What to do if my LG WM2032HW Washer has drying issues?
If you're experiencing drying issues with your LG Washer, avoid overloading the machine. Ensure that the washer is draining properly to extract adequate water from the load before drying. If the clothes load is too small to tumble properly, add a few towels to help.
What to do if my LG WM2032HW is making rattling, clanking, thumping, or vibrating noises?
If your LG Washer is making excessive noise, stop the washer and check the drum and drain filter for any obstructions. If the noise persists after restarting, it may indicate an imbalance. Stop the washer and redistribute the wash load evenly. Also, make sure you have removed the shipping bolts (refer to the Installation Instructions for guidance). If the sound continues, try to stop the washer and rearrange the wash load. Adjust the leveling feet to ensure the washer is stable.
What to do if my LG WM2032HW Washer experienced a power failure?
If your LG Washer experienced a power failure, restart the cycle.
General| Type | Front Load |
|---|---|
| Capacity | 3.2 cu. ft. |
| Energy Star Certified | Yes |
| Spin Speed | 1200 RPM |
| Color | White |
| Steam Washer | Yes |
| Noise Level | 54 dB |
