To Next PageTo Next PageWhy does my LG WM2032HW show a WATER INLET ERROR?
A WATER INLET ERROR on your LG Washer means that the correct water level (2 level) was not reached within 8 minutes after water was supplied, or the preset water level was not reached within 25 minutes.
What to do if my LG WM2032HW is making rattling, clanking, thumping, or vibrating noises?
If your LG Washer is making excessive noise, stop the washer and check the drum and drain filter for any obstructions. If the noise persists after restarting, it may indicate an imbalance. Stop the washer and redistribute the wash load evenly. Also, make sure you have removed the shipping bolts (refer to the Installation Instructions for guidance). If the sound continues, try to stop the washer and rearrange the wash load. Adjust the leveling feet to ensure the washer is stable.
Why is the wash cycle time delayed on my LG WM2032HW?
The wash cycle time on your LG Washer may vary depending on several factors, including the amount of laundry, water pressure, water temperature, and other usage conditions. The wash time will increase if an imbalance is detected or if the suds removing program operates.
What to do if my LG WM2032HW Washer has drying issues?
If you're experiencing drying issues with your LG Washer, avoid overloading the machine. Ensure that the washer is draining properly to extract adequate water from the load before drying. If the clothes load is too small to tumble properly, add a few towels to help.
What to do if the load is too small in my LG WM2032HW?
If the load in your LG Washer is too small, add one or two similar items to help balance the load.
What to do if water overfills in my LG WM2032HW?
If water is overfilling in your LG Washer due to a faulty water valve, close the water tap, unplug the power plug, and call for service.
General| Type | Front Load |
|---|---|
| Capacity | 3.2 cu. ft. |
| Energy Star Certified | Yes |
| Spin Speed | 1200 RPM |
| Color | White |
| Steam Washer | Yes |
| Noise Level | 54 dB |
