26
WM2688H*M Steam Washer Training
Install the Dryer Modem
If you’re installing both the washer
and the dryer at this time, you might
as well install the dryer modem now.
Remove the cover and
install the modem on the
back of the dryer.
Save the small socket cover
and screws in the event you
need to remove the modem
for some reason. The
socket should be covered at
all times.
After installation is complete,
plug in the washer, dryer,
and monitor, in that order.
Turn on the washer and
dryer. Press and hold the
SET button on the monitor.
T- 14
To Next Page
Loading...
