97
WM2688H*M Steam Washer Training
Disassembly and Repair
Dampers
3. Use special tool 383EER4003A
to remove the damper pins. If
you are replacing the dampers,
you’ll have to remove both
ends. If you are removing the
tub for major repair work,
disconnect the damper ends at
the base and leave the other
ends connected until you
remove the tub. When putting
the tub back into the machine,
connect the dampers to the tub
first. It is much easier that way.
4. Be careful not to pull the
dampers apart while they are
disconnected.
T- 50
To Next Page
Loading...
