LG WM2701H Series - User Manual

Questions and Answers

D
dmartinezJul 27, 2025
What to do if my LG WM2701H shows an IMBALANCE ERROR?
- C
  Calvin WardJul 27, 2025
  If your LG Washer displays an imbalance error, it could be due to several reasons. The load might be too small, the appliance could be tilted, the laundry might be gathered to one side, or non-distributable items may have been placed in the drum. To resolve this, redistribute the load evenly, ensure the appliance is level, and remove any non-distributable items from the drum.
D
Danielle ClarkAug 2, 2025
What to do if my LG WM2701H has a DOOR OPEN ERROR?
- J
  Jamie LaneAug 2, 2025
  If your LG Washer shows a door open error, it could be due to a few reasons. First, ensure the door is securely closed. Also check for loose electrical connections at the door switch and PWB assembly. If the problem persists, the DOOR SWITCH ASSEMBLY might be out of order.
T
Tamara ZimmermanAug 8, 2025
Why does my LG WM2701H Washer show a LOCKED MOTOR ERROR?
- T
  Tonya MooreAug 8, 2025
  If your LG Washer displays a locked motor error, it could be due to several reasons: the connector in the MOTOR HARNESS is not connected, the electric contact between the connectors is bad or unstable, the MOTOR HARNESS is cut, or the hall sensor is defective. Check the connections and condition of the MOTOR HARNESS and hall sensor.
E
Eric ThomasAug 13, 2025
What to do if my LG WM2701H shows a HEATING ERROR?
- A
  aliciaphillipsAug 14, 2025
  If your LG Washer shows a heating error, it means that the THERMISTOR is out of order. Inspect and replace the THERMISTOR if it is defective.
G
gbryantAug 19, 2025
What to do if my LG WM2701H Washer shows an EEPROM ERROR?
- C
  Christina RojasAug 19, 2025
  If your LG Washer displays an EEPROM error, it means that the EEPROM is out of order. Check and replace the EEPROM if necessary.