What to do if my LG WM2701H shows an IMBALANCE ERROR?
If your LG Washer displays an imbalance error, it could be due to several reasons. The load might be too small, the appliance could be tilted, the laundry might be gathered to one side, or non-distributable items may have been placed in the drum. To resolve this, redistribute the load evenly, ensure the appliance is level, and remove any non-distributable items from the drum.
What to do if my LG WM2701H has a DOOR OPEN ERROR?
If your LG Washer shows a door open error, it could be due to a few reasons. First, ensure the door is securely closed. Also check for loose electrical connections at the door switch and PWB assembly. If the problem persists, the DOOR SWITCH ASSEMBLY might be out of order.
Why does my LG WM2701H Washer show a LOCKED MOTOR ERROR?
If your LG Washer displays a locked motor error, it could be due to several reasons: the connector in the MOTOR HARNESS is not connected, the electric contact between the connectors is bad or unstable, the MOTOR HARNESS is cut, or the hall sensor is defective. Check the connections and condition of the MOTOR HARNESS and hall sensor.
What to do if my LG WM2701H shows a HEATING ERROR?
If your LG Washer shows a heating error, it means that the THERMISTOR is out of order. Inspect and replace the THERMISTOR if it is defective.
What to do if my LG WM2701H Washer shows an EEPROM ERROR?
If your LG Washer displays an EEPROM error, it means that the EEPROM is out of order. Check and replace the EEPROM if necessary.
Provides a comprehensive list of technical specifications for the washing machine model WM2701H*.
Safety precautions and procedures for performing the load test mode.
Lists common error codes, their symptoms, and potential causes.
Troubleshooting flowcharts for the Inlet Valve Error code.
Troubleshooting flowcharts for the Drain Error code.
Troubleshooting flowcharts for the Heating Error code.
Troubleshooting flowcharts for the Locked Motor Error code.
Troubleshooting flowcharts for the Door Open Error code.
Troubleshooting flowcharts for Unbalance and Overflow Error codes.
Troubleshooting flowcharts for the Pressure Sensor Error code.
Troubleshooting steps for general problems like 'No Power' or button malfunctions.
Steps to diagnose and resolve vibration and noise issues during the spin cycle.
Procedures for checking the vibration sensor and related components.
To Next Page
General
