What to do if LG WM3488H Washer tub does not rotate?
If your LG Washer tub does not rotate, close and secure the door. If the message persists, unplug the power and contact your nearest LG service center.
Why are my clothes wrinkled after washing in my LG WM3488H Washer?
If you find your clothes are wrinkling after being washed in your LG Washer, remove the load immediately after it finishes. Avoid overloading the tub. Check the inlet hose connections to ensure hot and cold water inlets are not reversed, as hot water rinse can cause garments to wrinkle.
What to do if my LG WM3488H Washer is draining slowly?
If your LG Washer is draining slowly or not at all, ensure the drain hose is positioned within 3 feet below the end of the elbow bracket. Position the drain hose on a smooth surface to prevent bending. If the drain hoses are frozen, thaw them with warm water. Also, open the drain pump plug cap and remove any accumulated dirt.
Why is my LG WM3488H Washer making a clicking sound?
If you hear a clicking sound from your LG Washer, this sound is normal and occurs when the door is closed, locked, or unlocked.
Why does my LG WM3488H Washer smell musty?
If your LG Washer smells musty or moldy, use only HE (High-Efficiency) detergent recommended for a front-loading washing machine. Clean the inside and outside of the washing machine periodically.
How to fix water hammer in my LG Washer?
If you hear a banging noise when your LG Washer is filling with water (Water Hammer) and plumbing in the home moves or flexes when the water valves in the washer shut off, install water hammer arrestors (purchased separately at hardware or home improvement store) between the fill hose and the washer. If the household water supply pressure is very high, adjust household water supply regulator to a lower pressure or contact a plumber to have a regulator installed.
What to do if clothing gathers on one side of the tub in my LG WM3488H Washer?
If clothing gathers on one side of the tub in your LG Washer, rearrange the items to help balance the load. If you are washing stuffed animals or mats, rearrange the knitwear to help balance the load and drain it again. When washing blankets, put one blanket in at a time.
What to do if my LG WM3488H tub does not rotate?
If the tub in your LG washer isn't rotating, make sure the door is fully closed and secured. If the issue persists, unplug the power and contact your nearest LG service center.
Why is my LG WM3488H Washer draining slowly or not at all?
If your LG Washer is draining slowly or not at all, try the following: ensure the drain hose is positioned within 3 feet below the end of the elbow bracket, place the drain hose on a smooth surface to prevent bending, thaw frozen drain hoses with warm water, and open the drain pump plug cap to remove any dirt.
Why won't my LG WM3488H turn on?
If your LG Washer won't turn on, make sure the power cord is properly plugged into a grounded 3-prong, 120 V (60 Hz) outlet. Also, check if a house fuse has blown, a circuit breaker has tripped, or a power outage has occurred. Reset the circuit breaker or replace the fuse, without increasing its capacity. If the problem is a circuit overload, consult a qualified electrician.
General| Type | Washer/Dryer Combo |
|---|---|
| Capacity | 2.3 cu. ft. |
| Color | White |
| Energy Star Certified | Yes |
| Wash Cycles | 14 |
| Spin Speed | 1400 RPM |
| Steam | Yes |
| SmartDiagnosis | Yes |
| Stackable | No |
| Steam Function | Yes |
| Smart Connectivity | No |
| Width | 24 inches |
| Noise Level | 54 dB |
Essential guidelines to minimize risks of fire, electric shock, and injury during appliance use.
Proper grounding procedures to prevent electric shock hazards and ensure appliance safety.
Safety measures critical for the correct and safe installation of the washing machine.
Safety advice for operating, cleaning, maintaining, and disposing of the washer.
A visual sequence of key installation procedures for the washing machine.
Guidelines for selecting a stable, level, and accessible site for installation.
Instructions for safely removing transit bolts to prevent damage and vibration.
Steps for correctly attaching hot and cold water hoses to the machine and faucets.
Procedures for properly installing the drain hose to ensure effective water removal.
Methods for ensuring the machine is level and stable to prevent vibration and noise.
Guidance on connecting the power supply and performing initial operational checks.
A step-by-step guide to initiating and running a wash cycle.
Comprehensive table detailing fabric types, recommended cycles, and available options.
Routine cleaning of the tub, door seal, and exterior to maintain performance.
To Next Page
