Why is my LG WM3488H leaking water?
If your LG Washer has water leaking around it, check the faucets and water lines for leaks. Also, inspect the drain pipe or drain hose for clogs and unclog them if necessary. If you can't unclog it yourself, contact a plumber.
Why won't my LG WM3488H turn on?
If your LG Washer won't turn on, make sure the power cord is properly plugged into a grounded 3-prong, 120 V (60 Hz) outlet. Also, check if a house fuse has blown, a circuit breaker has tripped, or a power outage has occurred. Reset the circuit breaker or replace the fuse, without increasing its capacity. If the problem is a circuit overload, consult a qualified electrician.
Why is my LG WM3488H Washer draining slowly or not at all?
If your LG Washer is draining slowly or not at all, try the following: ensure the drain hose is positioned within 3 feet below the end of the elbow bracket, place the drain hose on a smooth surface to prevent bending, thaw frozen drain hoses with warm water, and open the drain pump plug cap to remove any dirt.
What to do if my LG WM3488H tub does not rotate?
If the tub in your LG washer isn't rotating, make sure the door is fully closed and secured. If the issue persists, unplug the power and contact your nearest LG service center.
What to do if my LG WM3488H has a power failure?
If a power failure has occurred with your LG washing machine, press the Power button to turn the washer off, and then press it again to turn it back on.
Why is my LG WM3488H tub not rotating?
If the tub in your LG Washer isn't rotating, rearrange the load size and restart the washing machine. If the load size is too big, the tub may not rotate due to an overheated motor. Allow the washing machine to stand for a while and restart the cycle. If the same error message appears, unplug the power cord and contact your nearest LG service center.
What to do if my LG WM3488H Washer drains slowly?
If your LG Washer is draining slowly or not at all, make sure the drain hose is positioned correctly. It should be within 3 feet below the end of the elbow bracket and placed on a smooth surface to prevent bending. If the drain hoses are frozen, thaw them in warm water. Also, check the drain pump plug cap and remove any dirt.
Why is water not supplied to my LG WM3488H?
If your LG Washer isn't getting enough water or the water pressure is low, first, check that the faucets are fully turned on. If any faucet is frozen, thaw it using warm water. Ensure the water lines are properly connected to the cold water inlet. Also, inspect the water lines to ensure they are not pinched, bent, or twisted by other objects.
What to do if my LG WM3488H Washer is draining slowly?
If your LG Washer is draining slowly or not at all, ensure the drain hose is positioned within 3 feet below the end of the elbow bracket. Position the drain hose on a smooth surface to prevent bending. If the drain hoses are frozen, thaw them with warm water. Also, open the drain pump plug cap and remove any accumulated dirt.
What to do if the LG WM3488H door won't open?
If your LG Washer door doesn't open after the cycle finishes, it might be due to high temperature inside the tub. The washing machine has a safety lock to prevent burning, so wait until the door lock icon disappears from the display. Alternatively, the water level might be high; allow the washer to complete the programmed cycle, or press the SPIN button.
General| Type | Washer/Dryer Combo |
|---|---|
| Capacity | 2.3 cu. ft. |
| Color | White |
| Energy Star Certified | Yes |
| Wash Cycles | 14 |
| Spin Speed | 1400 RPM |
| Steam | Yes |
| SmartDiagnosis | Yes |
| Stackable | No |
| Steam Function | Yes |
| Smart Connectivity | No |
| Width | 24 inches |
| Noise Level | 54 dB |
Essential guidelines to minimize risks of fire, electric shock, and injury during appliance use.
Proper grounding procedures to prevent electric shock hazards and ensure appliance safety.
Safety measures critical for the correct and safe installation of the washing machine.
Safety advice for operating, cleaning, maintaining, and disposing of the washer.
A visual sequence of key installation procedures for the washing machine.
Guidelines for selecting a stable, level, and accessible site for installation.
Instructions for safely removing transit bolts to prevent damage and vibration.
Steps for correctly attaching hot and cold water hoses to the machine and faucets.
Procedures for properly installing the drain hose to ensure effective water removal.
Methods for ensuring the machine is level and stable to prevent vibration and noise.
Guidance on connecting the power supply and performing initial operational checks.
A step-by-step guide to initiating and running a wash cycle.
Comprehensive table detailing fabric types, recommended cycles, and available options.
Routine cleaning of the tub, door seal, and exterior to maintain performance.
To Next Page
