43MAINTENANCE
ENGLISH
4 Immerse the water inlet hoses in hot water to
thaw them.
5 Reconnect the water inlet hoses to the water
inlets of the washer and to the faucets.
•See Connecting the Water Inlet Hoses for
details.
6 Turn on the faucets.
7 Press the Power button to turn on the
washer.
8 Press the Spin button to operate spin only
cycle for draining and spinning.
9 Press the Start/Pause button.
When the Drain Hose Is Frozen
1 Pour hot water in the washer drum and close
the door.
2 Wait for 1 - 2 hours.
3 Press the Power button.
4 Press the Spin button to operate spin only
cycle for draining and spinning.
5 Press the Start/Pause button to make sure
the water drains.
To Next Page
Loading...
Need help?
General
