To Next PageTo Next PageWhy is my LG WM8000HVA Washer power not turned on?
Ensure the power cord is properly plugged into a grounded 3-prong, 120 V (60 Hz) outlet. Also, check if a house fuse has blown, a circuit breaker has tripped, or a power outage has occurred. Reset the circuit breaker or replace the fuse if necessary. Do not increase the fuse capacity; if there's a circuit overload, have it corrected by a qualified electrician.
What to do if my LG WM8000HVA is leaking water?
Check the faucets and water lines for leaks. Also, determine if a drain pipe or drain hose is clogged. Unclog the drain pipe or drain hose, and contact a plumber if necessary.
What to do if my LG Washer tub does not rotate?
Rearrange the load size and restart the washing machine. If the load size is big, the tub may not rotate due to an overheated motor. Allow the washing machine to stand for a while and restart the cycle.
What to do if my LG Washer water is not supplied or the water pressure is low?
First, make sure the faucets are turned on. If a faucet is frozen, thaw it with warm water. If the inlet filter is clogged, clean it. Ensure the water line is properly connected to the cold water inlet and that the water lines are not pinched or bent, taking extra care to prevent twisting or pinching by other objects.
What to do if my LG WM8000HVA Washer door does not open after cycle?
The washing machine has a safety lock built into the door to prevent burning. Leave the door closed and wait until the door lock icon disappears from the display. Allow the washer to complete the programmed cycle, or press the SPIN button.
Why does my LG WM8000HVA Washer have excessive suds?
This is often due to using too much detergent for the load size or soil level. Use the recommended amount of detergent for the load. If the contamination level is low, reduce the detergent quantity to less than the recommended level. Only use detergent with the HE (High- Efficiency) logo.
What to do if my LG WM8000HVA Washer drains slowly?
Lower the drain hose within 3 feet below the end of the elbow bracket. Place the drain hose on a smooth surface to prevent bending. If the drain hoses are frozen, thaw them in warm water. Open the drain pump plug cap and remove the dirt.
Why is my LG Washer vibrating?
Several factors can cause vibration. Check if the shipping bolts have been removed. Stop the cycle and rearrange the load for balancing. Make sure the washing machine is level balanced and installed on a solid and smooth surface. Ensure the floor is solid and level.
Why is my LG WM8000HVA wash cycle time longer than usual?
This is normal. The washing machine automatically adjusts the cycle time for the amount of laundry, water pressure, water temperature, and other operating conditions.
How to fix rattling noise in LG WM8000HVA?
Check if there are any foreign objects such as keys, coins, or safety pins in the tub and drain the filter after stopping the cycle.
General| Style | front load |
|---|---|
| Color | silver, graphite steel |
| Washer Capacity | 5.2 cubic feet |
| Max Spin Speed | 1300 revolutions per minute |
| Noise level | yes |
| Internal Heater | yes |
| Control Panel | electronic |
| Delay Start / End | yes |
| Child Lock | yes |
| Cycle Signal | yes |
| Interior Light | yes |
| Steam | yes |
| Annual Energy Consumption | 120 kilowatt hours |
| Voltage | 120 volts |
| Current | 10 amperes |
Weight and Dimensions| Depth | 32.3 inches |
|---|---|
| Height | 40.8 inches |
| Width | 29 inches |
| Net Weight | 227.1 pounds |
The inverter motor connected directly to the tub minimizes energy loss and noise.
Transmits data to the Customer Information Center for fast diagnosis of technical difficulties.
Follow basic precautions to reduce the risk of fire, electric shock, or injury.
Ensures proper grounding to minimize the risk of electric shock.
Guidelines for safe installation to prevent shock, fire, or injury.
Precautions for safe operation, maintenance, and disposal.
Covers fundamental steps for operating the washer and understanding cycle types.
Explains common error codes and their possible causes and solutions.
Checks to perform for common problems before contacting customer support.
