LG Wowcast WTP3 - Checking the connection with the LED on LG WOWCAST

7
d Press the Function / button on the remote contorl of the sound bar repeatedly until “OPT/HDMI
ARC” appears on the status display.
e Press the Settings button on the TV remote control to enter the [Speaker] menu and set the output
speaker to [HDMI (e)ARC]. Settings and menu items may vary depending on the TV manufacturer.
When the connection is automatically established with the LG WOWCAST and the sound bar,
“CONNECTED” and then “WOWCAST” appear on the status display of the sound bar.
Note
• Depending on the TV manufacturer, the time it takes for sound to come out may vary. So you can plug
into the electrical outlet for a stable power supply.
• If the optical input signal and the LG WOWCAST signal attempt to connect at the same time, the LG
WOWCAST signal will take priority.
• 동글을TVHDMIARC단자에연결하고,사운드바의HDMI출력과TVHDMI입력단자에동시연결하지말것.
오동작할수있음
• 무선환경이안좋으면음끊김이있을수있으므로동글과사운드바를근접하여설치할것
• 사운드바네트워크연결하지않은상태로동글과동작하고있다가Wi-FiSetup시Wi-FiFunction전환으로
인해소리가TV로나올수있음
• 설치환경이바뀌거나문제가있을경우,동글과사운드바를모두리셋후재시도할것
• WoW동글을연결하여사운드바사용시HDMIIN단자는사용이불가능함(*사용자가WoW동글연결과
HDMI케이블연결이기능상동일하다고착각할수있습니다.(ARC/eARC기능만대응))
• 동글과사운드바가연결되는시점에신규버전이있을경우업데이트진행,LCD는"W-UPDATE"로표시하고
완료후리부팅
• This Product will be updated automatically to expand product life cycle.
Checking the connection with the LED on LG WOWCAST
You can check the connection status by looking at the LED on the LG WOWCAST.
LED Status
Blinking Connecting in progress
On Connected successfully
Off No power supply