-. This is PCB assembly, First of all we have to find the connector to update the S/W of display
PCB.
-. After locating the electrical
connector to the display PCB,
disconnect the connector &
connect the Jig
connector.
Service Bulletin
WASHING MACHINE
STEP5 : Connecting PCB jig to PCB Display download connector.
PCB Jig Housing
Ready for S/W update
Connect the power adapter to PCB jig, the
jig screen should appear as pictured
below.
PCB Housing
+
< Caution >
Direct Mode
Check S/W
button
5 / 9
To Next Page
Loading...
