If you notice excessive suds in your LG washing machine, it could be due to using too much detergent or the incorrect type. Try reducing the amount of detergent you use or switch to a low-sudsing detergent with the HE (High-Efficiency) logo.
U
uadkinsAug 25, 2025
What to do if my LG WT1101CW Washer displays the uE error code?
A
annettemorrisAug 25, 2025
If the uE rebalance is not successful, the automatic attempt to rebalance the load was not successful and the cycle has been paused to allow the load to be manually adjusted. Small loads may need additional items to be added to allow the washer to balance the loads. The load may have heavy items loaded with lighter items. Always try to wash articles of somewhat similar weight to allow the washer to evenly distribute the weight of the load for spinning. Manually redistribute the load if articles have become tangled preventing the automatic distribution from working properly.
D
Daniel JonesAug 25, 2025
How to fix an LG Washing machines that will not turn on?
A
andrewharrisAug 26, 2025
If your LG washing machine won't turn on, here are some things to check:
* Make sure the power cord is securely plugged into a grounded, 3-prong, 120-VAC, 60-Hz outlet.
* Check your house fuse or circuit breaker and reset or replace if necessary. It is recommended to have a dedicated circuit for the washer.
* If the display doesn't come on and the washer has been exposed to freezing temperatures, allow it to warm up before pressing the POWER button.
T
Troy RileyAug 26, 2025
Why is my LG Washing machines leaking water?
P
Patrick RobertsAug 27, 2025
If you notice water leaking around your LG washing machine, check the following:
* Ensure that the fill hose connections are tight at both the tap and the washer.
* Inspect the house drain pipes for clogs. If necessary, contact a plumber to unclog them.
* If you're washing large items, make sure to use the BULKY/BEDDING cycle and position the items correctly in the tub.
F
fbridgesAug 27, 2025
Why LG Washing machines will not drain water?
U
uharrisAug 27, 2025
If your LG washing machine won't drain water, make sure that the drain hose is not kinked. Also, the drain outlet should not be higher than 8 feet above the floor, according to the installation instructions.
J
Julie CainSep 9, 2025
What does clutch error mean on my LG WT1101CW?
N
Nancy WhiteSep 9, 2025
If your LG Washer displays an error code related to clutch, unplug the washer, and call for service.
R
Russell JimenezSep 7, 2025
What does LE error mean on my LG WT1101CW Washer?
B
Brooke WrightSep 7, 2025
If your LG Washer displays an error code related to thermal overload, allow the washer to stand for 30 minutes to allow the motor to cool; then restart the cycle. If the LE error code still appears, unplug the washer and call for service.
M
Michael RobinsonSep 8, 2025
What should I do if my LG WT1101CW displays a thermistor error?
S
Steven ButlerSep 8, 2025
If your LG Washer displays an error code related to thermistor, unplug the washer and call for service.
C
Christopher BlackwellSep 2, 2025
What does it mean if my LG WT1101CW Washer displays an error related to the water level sensor?
J
jessicagainesSep 2, 2025
If your LG Washer displays an error code related to the water level sensor, close the water taps, unplug the washer, and call for service.
S
Savannah BishopAug 31, 2025
What to do if my LG Washer displays a lid lock error?
K
Kevin BowmanAug 31, 2025
If your LG Washer displays an error code related to the lid lock switch, make sure that the lid is closed properly and press the START/PAUSE button. The washer will not spin unless the lid is locked (LID LOCK light will turn on).