To Next PageTo Next PageWhy won't my LG WT5070CW turn on?
Your LG washer might not be turning on due to several reasons: the power cord may not be properly plugged in (ensure it's securely plugged into a grounded outlet), a house fuse might be blown or the circuit breaker tripped (reset the breaker or replace the fuse, avoiding increasing the fuse capacity), or there may be a power outage. If it's a circuit overload, a qualified electrician should correct it.
What to do if water is leaking around my LG WT5070CW?
If you notice water leaking around your LG washer, check the fill hoses for loose connections at the tap or washer and tighten them. Also, inspect the house drain pipes for clogs and unclog them if necessary, or contact a plumber. If you are washing large items, use the BULKY/BEDDING cycle and ensure bulky items are properly laid into the tub.
How to fix LG Washer that fills with water slowly?
If your LG washer is filling with water slowly or not at all, make sure the water supply taps are fully open and that the water line hoses are not kinked, pinched, or bent. Also, the water inlet filters may be clogged, so clean them. Finally, check another faucet in the house to ensure that household water pressure is adequate.
Why is my LG WT5070CW not draining water?
If your LG washer isn't draining water, check that the drain hose isn't kinked. Also, ensure that the drain outlet isn't higher than 8 feet above the floor, as per the recommended installation instructions.
Why is my LG WT5070CW Washer not filling with enough water?
Your LG washer may not be filling properly because the filters are clogged, or the fill hoses may be kinked. Ensure that the filters are free of solids by turning off the water and checking the filter after disconnecting the hose at the machine. Also, check that the fill hoses are not kinked or clogged. This washer is energy-efficient, so water may not cover the top level of the clothes, which is normal. Make sure that the water supply is turned on and the faucets are completely open. The washer lid must be closed for all washer cycle operations. Make sure that the fill hoses connect the hot water supply to the hot inlet on the washer, and the cold water supply to the cold inlet on the washer (hot to hot, cold to cold).
How to fix slow drain on LG WT5070CW?
If water in your LG washer drains slowly or not at all, make sure the drain hose is free of clogs, kinks, etc., and is not pinched behind or under the washer.
What does it mean when my LG WT5070CW Washer displays a lid lock switch error?
Make sure that the lid is closed properly and press the START/PAUSE button. The washer will not spin unless the lid is locked (LID LOCK light will turn on). If the lid is closed and the lid lock error message is displayed, call for service.
What should I do if my LG WT5070CW Washer displays a water level error?
Close the water taps, unplug the washer, and call for service.
What should I do if my LG WT5070CW Washer displays a clutch error?
Unplug the washer, and call for service.
How to stop my LG WT5070CW Washer from vibrating so much?
If your LG washer is making a vibrating noise, stop the washer and rearrange the wash load to distribute it evenly in the drum. Adjust the leveling feet to ensure all four feet are in firm contact with the floor while the washer is in the spin cycle. Make sure that the floor is solid and does not flex.
General| Door color | Gray |
|---|---|
| Door hinge | Up |
| Motor type | Beltless |
| Display type | LED |
| Loading type | Top-load |
| Tub material | Plastic |
| Drum material | Stainless steel |
| Product color | White |
| Built-in display | Yes |
| Appliance placement | Freestanding |
| Dispenser tray type | 3-way |
| Drum capacity | - kg |
| Delay start (max) | 19 h |
| Spin-drying class | - |
| Maximum spin speed | 1100 RPM |
| Noise level (wash) | - dB |
| Number of washing programs | 12 |
| Current | 10 A |
| AC input voltage | 120 V |
| Energy consumption washing per cycle | - kWh |
| Package depth | 787 mm |
| Package width | 736 mm |
| Package height | 1219 mm |
| Package weight | 78017 g |
Weight and Dimensions| Depth | 711 mm |
|---|---|
| Width | 685 mm |
| Height | 1143 mm |
| Weight | 65770 g |
| Depth with door open | 1397 mm |
Explains the direct-drive motor's benefits like reduced energy loss, noise, and vibration.
Describes the feature for transmitting diagnostic data to a call center for faster issue resolution.
Routine cleaning of the tub to maintain freshness and cleanliness.
Disables controls during a wash cycle to prevent accidental changes by children.
Saves rinse water by using jet spray in specific wash cycles.
Highlights the durability of the stainless steel drum.
Defines hazard symbols and words (DANGER, WARNING, CAUTION) for user safety.
Essential precautions to reduce risks of fire, electric shock, or injury during appliance use.
Identifies all components and included accessories for the washing machine.
Step-by-step guide on basic operation of the washing machine controls.
Explains how the display shows the estimated time left in the wash cycle.
Describes the display segment indicating the current stage of the wash cycle.
Provides a visual summary of the key steps involved in installing the washing machine.
Details the necessary clearances around the washer for water lines, drain, and airflow.
Lists essential tools required for the installation process.
Instructions for performing a test cycle to verify proper installation and operation.
Guidelines for sorting laundry by color, soil level, fabric type, and lint production.
Advice on preparing clothes to prevent shrinkage or damage during washing.
Explains the meaning of various symbols on clothing care labels.
Recommendations for sorting laundry based on colors, soil, fabric, and lint.
Instructions for using HE detergents and loading the dispenser correctly.
Details on using the main wash detergent, liquid bleach, and fabric softener compartments.
A step-by-step guide for performing a standard wash cycle.
Provides recommendations for fabric types and settings for each wash cycle.
Explains the purpose and usage of various main wash cycles.
How to customize cycles using temperature, soil level, spin speed, and special features.
Details on using cycles like RINSE+SPIN, SPIN ONLY, STAIN CARE, SOAK, COLDWASH, EXTRA RINSE, and FABRIC SOFTENER.
Features for setting delayed start, saving custom programs, child lock, and adding water.
Instructions for safely adding more laundry during the wash cycle.
Procedure for cleaning inlet filters to ensure proper water flow and prevent error messages.
Steps to take if water lines or the drain line freeze.
Instructions for cleaning the washing machine tub to prevent mold and odors.
Guide to cleaning the detergent dispenser drawer and its compartments.
Explains common error codes and their solutions.
Troubleshooting steps for error codes related to load balance, thermistor, and draining.
Describes common sounds and troubleshooting steps before calling for service.
Solutions for issues like not operating, not filling, not draining, leaks, and long cycle times.
Addresses problems with detergent dispensing, stain removal, and wrinkling.
Lists the model number and key technical specifications of the washing machine.
Step-by-step guide for using the SmartDiagnosis™ feature to troubleshoot issues.
Details the duration of the warranty for different parts and labor.
Explains the process and availability of in-home service for warranty claims.
Lists exclusions from the limited warranty coverage.
Outlines the warranty periods for parts and labor in Canada.
Lists items and conditions not covered by the Canadian warranty.
