INSTALLATION INSTRUCTIONS 13
Unpacking the washer
1 After the washer is in the home, remove the carton and
Styrofoam@ shipping base from the washer.
3
Unfasten the power cord from the back of the
washer.
When removing the washer from the carton base, be sure
to remove the tub support in the middle of the carton base.
If you must lay the washer down to remove the base
packaging materials, always protect the side of the washer
and lay it carefully on its side. Do NOT lay the washer on its
front or back.
f_
TOOLS YOU WILL NEED
Adjustable Pliers
• Carpenter's Level
Tub support
Carton Base
Remove the packing block containing the owner's
manual, parts and laundry product samples.
To Next Page
Loading...
