24 USING YOUR WASHING MACHINE
Cycle set"ling buttons
Each cycle has preset settings that are selected
automatically. You may also customize the settings using
the cycle setting buttons. Press the button for that option to
vies/and select other settings.
The washer automatically adjusts the water level for the
type and size of wash load for best results and maximum
efficiency. It may seem there is no water inside the drum in
some cycles, but this is normal.
-@ NOTE
. To protect your garments, not every wash temperature,
spin speed, soil level, or option is available with every
cycle. See the Cycle Guide for details
Setting options be{ore cycle
You can select and add the desired optional functions before
you start the washing machine.
Setting the water temperature, WASH TEMR
Set the water temperature for the wash cycle. Set the
appropriate temperature, as specified in the fabric care label.
1 Turn the cycle selector knob to the desired cycle.
2 Press @ repeatedly to select the desired water
temperature:
- When an optional item is selected, an indication light for
the corresponding optional item turns on.
3 Press the desired option button to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
4 Press @.
@ NOTE -,
• Cold rinses use less energy.
Select the water temperature suitable for the type of
load you are washing. Follow the fabric care label for
Setting soil level o{ laundry_ SOIL LEVEL
You can wash your laundry more thoroughly by setting the
proper soil level on the washing machine.
1 Turn the cycle selector knob to the desired cycle.
2 Press @ repeatedly to select a soil level.
- When an optional item is selected, an indication light for
the corresponding optional item turns on.
3 Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
Press @.
@ NOTE 1
• This feature needs more time for heavily soiled loads or
less time for lightly soiled loads.
Setting spin speed, SPIN SPEED
You can set the desired spin speed.
Use this feature properly according to the characteristics of
the load.
1
2
Turn the cycle selector knob to the desired cycle.
Press _ repeatedly to select the desired spin speed.
- When an optional item is selected, an indication light for
the corresponding optional item turns on.
3 Press the desired option to use the other options.
- Skip to step 4 to use the default setting without
changing the options.
Press @.
NOTE
The SPIN SPEED button also activates the SPIN ONLY
cycle to drain the tub and spin clothes; for example,
if you want to remove clothes before the cycle has
ended.
Tuning on/o{{ melody and button tones,
SIGNAL ON/OFF
The washing machine plays a melody when the wash cycle
is finished. The buttons make a sound each time a button is
pressed. The melody and button tones can be adjusted the
volume as desired.
Adjusts the volume of the end-of-cycle signal or
S_GNALturns it off.
OFF-LOW-HIGH
_cHl_ LOCK
SPECIAL USE
@
Select any additional option, such as RINSE+SPIN,
SPIN ONLY, STAIN CARETMor SOAK. If you
press SPECIAL USE button without selecting a
cycle, COTTON/NORMAL cycle with SOAK is
automatically selected.
@ NOTE
If you press SPECIAL USE button 3 or 4 times, the
cycle will reset to COTTON/NORMAL
To Next Page
Loading...
