16
3-3. FUNCTION OF EACH BUTTON
•
Select to select Water
(Wash/Rinse) Temperature.
•
Pressing the button allows
The selection of TAP COLD
▶COLD ▶SEMI WARM
▶WARM ▶HOT
respectively. Default setting
is Warm/Cold.
WASH / TEMP.
Note
The time shown on the display is the estimated cycle time. If the sensors and microprocessor elect to
make changes during the cycle, the display will be adjusted accordingly.
POWER
•Power on.
•Push again, power goes off
• Power goes off automatically after the wash
is finished.
• After turning the power on, the unit will
automatically turn off if nothing is selected.
CYCLE BUTTON
•Use for selecting wash program.
• This button allows the selection of 10 different
programs for different kinds of laundry and
dirtiness.
• Program selections light up in sequence as follows:
COTTON/NORMAL▶BULKY/BEDDING▶BRIGHT
WHITE™▶TUB CLEAN▶ HEAVY DUTY
▶DELICATES▶SPEED WASH ▶DOWNLOADED
Select the desired program by ressing the button.
•
Allows a selection to be make for the
strength of the wash action.
•
Power option selections light up in
sequence as follows Normal ▶Heavy
▶ Light ▶ Normal as the button is
pushed.
This can be selected for any program.
•
Adjustment can be made while
washing.
•
Default SOIL LEVEL is Normal.
SOIL LEVEL
SPIN SPEED
• Spin speed
can be
selected from
No Spin to
Extra high.
Default is Low.
To Next Page
Loading...
