22
3) Disassembly of Top Cover and Lid
① Remove 2 screws attaching the back side of top
cover.
② Lift the top cover at the back of the washer
③ Push the Top Cover Assembly forward front side
until it doesn’t move.
④ Push each side of cabinet to remove from side
holders. If remove top cover from all of side
holder, lift the top cover.
⑤ Use the blade to push the left hinge out of the
way and to displace the hinge pin to remove the
lid.
⑥ Remove the lid by pulling the right hinge pin out
of its holder.
close open
To Next Page
Loading...
