38 MAINTENANCE
8 Press and hold the Spin button for 3 seconds
to run the Spin Only cycle for draining and
spinning.
9 Press the Start/Pause button and check that
the water fills properly.
When the Drain Hose is Frozen
1 Pour hot water in the washer tub and close
the lid.
2 Wait for 1 - 2 hours.
3 Press the Power button to turn on the
washer.
4 Press and hold the Spin button for 3 seconds
to run the Spin Only cycle for draining and
spinning.
5 Press the Start/Pause button to make sure
the water drains.
To Next Page
Loading...
