Need help?Do you have a question about the LG WTG9532WH and is the answer not in the manual?
Features a DD Motor for cleaner, hygienic wash tubs and fabric protection against wear.
Uses heating type laundry for uniform performance and sterilization effect, even with cold water.
Utilizes a built-in load sensor and microprocessor for optimized washing conditions and results.
Employs a Brushless DC motor rotating the tub directly, reducing noise and adjusting speed by clothing type.
A troubleshooting feature that transmits diagnostic data via phone for quick issue analysis.
Provides warnings regarding hydrogen gas production in water heaters and necessary precautions.
Details essential installation guidelines, including grounding, placement, and electrical safety.
A comprehensive chart detailing treatments for various common stains on different fabrics.
Enables Vapour Mode for enhanced washing and sterilization, compatible with specific cycles.
Indicates the location for phone placement to receive diagnostic signals for troubleshooting.
A hygienic wash using up to 40°C, with Vapour Mode option for 60°C heating.
High-temperature cycle designed to reduce allergens, utilizing 60°C water for part of the wash.
Locks all control panel keys to prevent accidental changes by children.
Recommends placing the machine on a flat, firm surface with adequate clearance for proper operation.
Details how to check if the machine is level and adjust the feet for stability and spin performance.
Guides on connecting the water supply hose to the water tap, differentiating between blue (cold) and orange (hot) hoses.
Details how to connect the drain hose for models equipped with a drain pump.
Provides instructions for connecting the drain hose on models without a drain pump.
Lists chemicals and products that can damage the washer's components or finish.
Caused by zippers, hooks, broken threads, or overloading; recommends fastening items and not overloading.
Error IE indicates issues with water tap, supply, pressure, or inlet filter.
Error OE points to drain hose position, kinks, clogs, or pump issues.
Error UE suggests an unbalanced load or an unevenly placed washing machine.
Errors LE or dL indicate the door is not closed, locked, or has foreign objects obstructing it.
Error EI signifies foreign objects caught between the pulsator and inner tub.
Message tCL prompts for tub cleaning; can be skipped but will reappear.
Instructions to turn on the machine and hold the Cold Wash button to initiate diagnosis.
Details placing the phone near the display and holding it during sound transmission for data transfer.
Listen to the consultant for results after data transmission; effectiveness depends on conditions.
To Next Page
General
