What to do if my LG WTV17HHD shows a dE DOOR ERROR?
If your LG Washer displays a dE DOOR ERROR, it indicates a door issue. First, ensure the door is completely closed. If the error persists, try pressing Start/Pause to cancel the error, then press Start/Pause again to restart the wash cycle. If the problem continues after these steps, it may require professional attention.
Why does my LG WTV17HHD Washer show a dL DOOR LOCK ERROR?
The dL DOOR LOCK ERROR on your LG Washer means the door isn't locking correctly. Make sure nothing is caught under the door, such as shipping materials or clothing. Close the door completely. If the error code continues to appear, it is recommended to call for service.
How to fix 1E INLET ERROR on LG Washer?
If your LG Washer displays a 1E INLET ERROR, it indicates a water supply issue. Here's what you should check: 1. Ensure the water supply taps are fully open. 2. Check that the water supply hoses aren't kinked, pinched, or crushed; straighten or reinstall them if needed. 3. Inspect and clean the filters of the supply hoses. 4. Do not use leak limiting hoses. If the issue persists, the water pressure to your tap or house might be too low or too high. In this case, contact a plumber to check and restore the water pressure to the required operating levels.
To Next Page
General
