LGB 55021 - User Manual

MZS-Decoder
55021

Summary

Installation in Locomotives without a Digital Interface

Simple Conversion

Basic installation for analog layouts, controlling digitally.

Advanced Conversions (for pros)

Full rewiring for lights, smoke generator, and motor monitoring.

First Operation

Testing voltage, connecting smoke generator, and handling locomotives with sound or two motors.

Installation with a Tethered Digital Interface

Interface Description

Recognize the interface by four pins (ge, ws, bn, gn) and a free pin receptacle.

DIP Switch Settings

Set micro switches (DIP switches) next to the interface from 'On' to 'Off'.

Installation in Locomotives with a Direct Decoder Interface

Interface Connection

Decoder plugs into unoccupied spring sleeves on the circuit board, 'face-to-face'.

DIP Switch Configuration

Set micro switches (DIP switches) next to the interface from 'On' to 'Off'.

Programming the Decoder

Advanced Programming

Advanced programming using the 55015 Universal Hand Controller or 55045 PC Programmer.

Programming with the 55015 Universal Hand Controller

Direct CV programming for CVs 1-5 and code-based programming for others.

Configuration Variable (CV) Settings

Settings for CV 29

Defines speed levels, direction, operation mode (analog/digital), and speed level tables.

Settings for CV 51

Assigns functions to buttons (F1, light buttons, taste buttons).

LGB 55021 Specifications

General

Connector Type	RJ45
Fiber Type	Multi-mode or Single-mode
Power Supply	5V DC
Type	Gigabit Ethernet Media Converter
Model	LGB-55021
Data Rate	10/100/1000 Mbps
Data Transfer Rate	10/100/1000 Mbps