EasyManua.ls Logo

LGMG A45JE User Manual

LGMG A45JE
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
LGMG North America Inc.
Operation and Safety Manual
A45JE
Mobile Elevating Work Platform
ANSI
WARNING
Before operation and maintenance, the
drivers and service personnel shall
always read and thoroughly understand
all information in this manual. Failure to
do so may result in, fatal accidents or
personal injury.
This manual must be kept with this
machine at all times.

Table of Contents

Other manuals for LGMG A45JE

Question and Answer IconNeed help?

Do you have a question about the LGMG A45JE and is the answer not in the manual?

LGMG A45JE Specifications

General IconGeneral
BrandLGMG
ModelA45JE
CategoryBoom Lifts
LanguageEnglish

Summary

Safety Precautions

Chapter 1 Safety

1.1 Danger and Serious Injury Risks

Failure to follow safety rules can cause death or serious injury.

1.6 Electric Shock Hazards and Clearances

Safety distances from power lines and electrical equipment.

1.7 Tipping Risks and Load Limits

Maximum load, wind speed, and personnel restrictions.

Chapter 4 Specifications

4.1 Performance Specifications

Detailed performance metrics including load, height, speed, and gradeability.

4.2 Dimensions and Measurements

Provides key dimensions like length, width, height, and tire specifications.

Chapter 5 Control Unit

5.1 Lower Control Box Layout

Diagram and list identifying components of the lower control box.

5.1 Lower Control Box Button Functions

Detailed functional descriptions of each button and switch on the lower control box.

5.1 Lower Control Box Functions (Continued)

Details functions of Jib, Platform Leveling, and Auxiliary Power switches.

5.2 Upper Control Box Layout

Diagram and list identifying components of the upper control box.

5.2 Upper Control Box Button Functions

Detailed functional descriptions of each button and switch on the upper control box.

5.2 Upper Control Box Functions (Continued)

Describes drive/steer controls, speed regulation, and auxiliary power functions.

System Fault Code and Diagnosis

Lists system error codes and their corresponding descriptions and solutions.

System Fault Code and Diagnosis (Continued)

Provides additional fault codes for various system issues and their resolutions.

Chapter 7 Workplace Inspection

7.1 Conditions Prohibiting Operation

Lists requirements for safe operation, including understanding principles and performing checks.

7.2 Basic Principles of Workplace Inspection

Operator's role in determining workplace safety and avoiding hazards.

7.3 Workplace Inspection Checklist

Identifies dangerous situations and conditions to check in the work area.

Chapter 6 Pre-Operation Inspection

6.3 Pre-Operation Inspection Checklist

Detailed steps for inspecting the vehicle before operation, including parts and systems.

Chapter 8 Functional Test

8.3 Functional Test Procedure

Steps for selecting a test place and ensuring battery connection before testing.

Chapter 9 Operating Instructions

9.3 Emergency Stop Procedures

Details how to use the emergency stop buttons on both control stations.

9.6 Operation from Platform Control Station

Instructions for operating the vehicle from the platform control station.

Chapter 10 Transportation and Lifting

Related product manuals