EasyManua.ls Logo

LGMG SS0407E User Manual

LGMG SS0407E
99 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Operation Manual
SS0407E/AS0607E/AS0812E/AS1012E/
AS1212E/AS1413E
Mobile Elevating Work Platform
! Warning
Before operation and maintenance, the
drivers and service personnel shall
always read and thoroughly understand
all information in this manual. Failure to
do so may result in, fatal accidents or
personal injury.
This manual must be kept with this
machine at all times.
LINGONG GROUP JINAN HEAVY MACHINERY CO., LTD.

Other manuals for LGMG SS0407E

Question and Answer IconNeed help?

Do you have a question about the LGMG SS0407E and is the answer not in the manual?

LGMG SS0407E Specifications

General IconGeneral
Gradeability25%
Drive Speed (Raised)0.8 km/h
Max Gradeability25%
Platform Capacity240 kg
Overall Width0.76 m
Turning Radius (Inside)0.3 m

Summary

Chapter 1 Safety

1.4 Battery Safety

Precautions for handling batteries, including combustion and explosion hazards.

Chapter 5 Controller

Platform Controller

Covers horn, lifting, display, emergency stop, control lever, drive, and mode selection.

Chapter 6 Pre-operation Inspection

6.2 Pre-operation Inspection

Lists components and areas to check before operating the machine.

Chapter 7 Workstation Inspection

7.2 Workstation Inspection

Details hazards to watch out for in the operating environment.

Chapter 8 Function Test

8.2 Function Test

Steps to perform a function test on a firm, horizontal ground.

8.4 Test of Emergency Stop

Verifies the functionality of the emergency stop buttons.

8.5 Test of Lifting/Lowering Function and Initializing

Checks platform lift/lower operations, safety limits, and initialization.

8.11 Test of Driving and Braking Function

Checks the machine's driving and braking systems.

8.13 Test for Operation of Inclination Sensor

Verifies the inclination sensor's response to platform tilt.

8.14 Test of Hollow Protector

Checks the automatic extension and function of the hollow protector.

Chapter 9 Operation Notice

9.2 Emergency Stop

Procedures for activating and recovering from the emergency stop function.

9.5 Platform Operation

Covers platform position adjustment, operation from platform, turning, and driving.

9.12 Driving on a Slope

Guidelines for safely operating the machine on inclines and slopes.

9.18 Error State (Alarm Code)

Lists alarm codes and their corresponding error descriptions and responses.

Chapter 10 Transport and Lifting Instruction

10.1 Brake Release

Safety precautions and steps for releasing the machine's brakes.

10.2 Transport Safety

Guidelines for safely securing and transporting the machine.

10.3 Forklift

Instructions for using a forklift to load or unload the machine.

Related product manuals